
HIGH
QUALITY BIRCH PLYWOOD 
WE ARE OFFERING AT EXCELLENT PRICES LAMINATED BIRCH PLYWOOD THAT IS GLUED WITH PHENOL FORMALDEHYDE. THE GLUE PREVENTS NATURAL CHANGES AND SWELLING. WE CAN SUPPLY THE FOLLOWING GRADES OF WOOD.
Grade "B": Selected one-piece face generally light and even in color. Occasional small pin knots and some brown streaks may be allowed. Intended for natural finish. No patches allowed. The majority of Grade B veneers are the equivalent of American one-piece select white birch faces
Grade
"BB": One-piece face generally light and even in color.
Occasional sound tight knots are permitted
but open knots and defects in BB have been cut out and replaced with
small ovular or round veneer patches before gluing. The veneer selected for
the patches is of the same general color as the basic face veneer. Generally
there are very few patches per face and many users purchase this grade for
cut up for natural finish.
Grade
"CP": One-piece face and very close to Grade BB in quality.
Occasional hairline splits are allowed in Grade CP. The ovular or round
patches may or may not be matched for color with the base face veneer. There
may be more patches per face than in Grade BB.

COLORS OF COVERINGS AVAILABLE
(shaggy surface or smooth surface)
Dark brown
Light brown
Black
A unilateral covering a film is 9 % from cost
CHARACTERISTICS
Wear-resistant cover of phenol film
Chemical resistant
Suitable for multiple use for planking
Non toxic
Large size
APPLICATIONS
High quality planking
Construction
House-building
Emergency boarding
Vehicles
Carriages
Packing
Furniture
Vehicle floors and bodies (trucks and buses)
STANDARD THICKNESS
|
mm |
Inch |
Quantity |
|
6,5 |
~1/4 |
5
- ply |
|
9 |
~3/8 |
7 - ply |
|
12 |
~1/2 |
9 - ply |
|
15 |
~5/8 |
11 -
ply |
|
18 |
~11/16 |
13 -
ply |
|
21 |
~13/16 |
15 -
ply |
|
24 |
~15/16 |
17 -
ply |
|
27 |
~1 1/16 |
19 -
ply |
|
30 |
~1 3/16 |
21 -
ply |
|
35 |
~1 3/8 |
24 -
ply |
|
40 |
~1 9/16 |
27 -
ply |
STANDARD SIZES
1220x2440mm (4¢x8¢)
2440x1220mm (8¢x4¢)
PHYSICAL/MECHANICAL PROPERTIES
Cleavage strength of glued ply after being boiled in water for one hour , mPa - 1.5
Static bending strength along the fibers, mPa not less - 65
Density, kg/m ³ - 670÷800
Moisture , 8 % ± 2 %
Emission class E-1 (formaldehyde contents in 100g. absolutely dry plywood mass, mg - to 8)
If you have an enquiry or would like a quote please don't hesitate to contact us.
US Tel/Fax: (305) 7169186